The instability of wrist joint and total wrist replacement / 中华创伤杂志(英文版)

Total wrist arthroplasty are not used as widely as total knee and hip replacement. The functional hands are requiring surgeons to design a durable and functional satisfying prosthesis. This article will list the main reasons that cause the failure of the prosthesis. Some remarkable and representative prostheses are listed to show the devolvement of total wrist prosthesis and their individual special innovations to fix the problems. And the second part we will discuss the part that biomechanical elements act in the total wrist replacement (TWA). Summarize and find out what the real problem is and how we can find a way to fix it.

Prevalence of Nontraumatic Osteonecrosis of the Femoral Head and its Associated Risk Factors in the Chinese Population: Results from a Nationally Representative Survey / 中华医学杂志(英文版)

<p><b>BACKGROUND</b>Nontraumatic osteonecrosis of the femoral head (NONFH) is a debilitating disease that represents a significant financial burden for both individuals and healthcare systems. Despite its significance, however, its prevalence in the Chinese general population remains unknown. This study aimed to investigate the prevalence of NONFH and its associated risk factors in the Chinese population.</p><p><b>METHODS</b>A nationally representative survey of 30,030 respondents was undertaken from June 2012 to August 2013. All participants underwent a questionnaire investigation, physical examination of hip, and bilateral hip joint X-ray and/or magnetic resonance imaging examination. Blood samples were taken after overnight fasting to test serum total cholesterol, triglyceride, and high-density lipoprotein (HDL) and low-density lipoprotein (LDL) levels. We then used multivariate logistic regression analysis to investigate the associations between various metabolic, demographic, and lifestyle-related variables and NONFH.</p><p><b>RESULTS</b>NONFH was diagnosed in 218 subjects (0.725%) and the estimated NONFH cases were 8.12 million among Chinese people aged 15 years and over. The prevalence of NONFH was significantly higher in males than in females (1.02% vs. 0.51%, χ2 = 24.997, P < 0.001). Among NONFH patients, North residents were subjected to higher prevalence of NONFH than that of South residents (0.85% vs. 0.61%, χ 2 = 5.847, P = 0.016). Our multivariate regression analysis showed that high blood levels of triglycerides, total cholesterol, LDL-cholesterol, and non-HDL-cholesterol, male, urban residence, family history of osteonecrosis of the femoral head, heavy smoking, alcohol abuse and glucocorticoid intake, overweight, and obesity were all significantly associated with an increased risk of NONFH.</p><p><b>CONCLUSIONS</b>Our findings highlight that NONFH is a significant public health challenge in China and underscore the need for policy measures on the national level. Furthermore, NONFH shares a number of risk factors with atherosclerosis.</p>

Fabrication and Evaluation of Porous Keratin/chitosan (KCS) Scaffolds for Effectively Accelerating Wound Healing / 生物医学与环境科学（英文）

<p><b>OBJECTIVE</b>To develop a dressing with desired antibacterial activity, good water maintaining ability and mechanical properties for wound healing and skin regeneration.</p><p><b>METHODS</b>The chitosan with different concentrations were added in keratin solution to form porous keratin/chitosan (KCS) scaffolds. The morphological characteristics, chemical composition, wettability, porosity, swelling ratio and degradation of the scaffolds were evaluated. The antibacterial activity was tested by using S. aureus and E. coli suspension for 2 h. And L929 fibroblast cells culture was used to evaluate the cytotoxicity of the KCS scaffolds.</p><p><b>RESULTS</b>The adding of chitosan could increase the hydrophobicity, decrease porosity, swelling ratio and degradation rate of the KCS porous scaffolds. Mechanical properties of KCS scaffolds could be enhanced and well adjusted by chitosan. KCS scaffolds could obviously decrease bacteria number. The proliferation of fibroblast cells in porous KCS patch increased firstly and then decreased with the increase of chitosan concentration. It was appropriate to add 400 μg/mL chitosan to form porous KCS scaffold for achieving best cell attachment and proliferation compared with other samples.</p><p><b>CONCLUSION</b>The porous KCS scaffold may be used as implanted scaffold materials for promoting wound healing and skin regeneration.</p>

Anatomical double bundle reconstruction of medial patellofemoral ligament with allograft tendon in the treatment of patellar dislocations / 中国骨伤

<p><b>OBJECTIVE</b>To investigate the clinical therapeutic results of allograft tendon for anatomical reconstruction of medial patellofemoral ligament (MPFL) for the treatment of patellar dislocations.</p><p><b>METHODS</b>From September 2008 to June 2013, 16 patients with patellar dislocation underwent MPFL reconstructions. There were 2 males and 14 females, aged 11 to 27 years old (16 years old on average). Patellar dislocations occurred in 11 left and 5 right knees. The disease course ranged from 3 to 10 years. The frequency of dislocation ranged from 9 to 33 times (19 times on average). Affected knee joints showed patellar instability; the range of action for patella obviously increased. The X-ray films showed patellar dislocation. The preoperative Q angle was (36 ± 9)°, and the congruence angle was (63 ± 18)°. Reconstruction was performed via allograft tendon. Allograft tendon was fixed through the superomedial pole of the patella, and the other end was fixed at the natural MPFL insertion site near the medial femoral condyle with an interference screw in a bone tunnel. All the patients were evaluated postoperatively; Kujala patellofemoral scores, objective knee function, complications, and reoperations were assessed.</p><p><b>RESULTS</b>Primary healing was achieved in all cases. No infection or necrosis and absorption of grafts was observed. All the patients were followed up for an average of 16.4 months (ranged, 10 to 24 months) postoperatively. At the latest follow-up, all the patients had no pain, swelling and patellar instability; neither patella redislocation nor fracture occurred. The X-ray films showed good position of tunnel 6 months after operation, and the congruence angle was (5 ± 9)°, showing statistically significant difference when compared with preoperation (P < 0.05). The postoperative Q angle was (17 ± 8)°, the Kujala knee function score improved significantly from 45.20 ± 9.20 to 89.30 ± 6.40 at the latest follow-up, showing statistically significant difference (P < 0.05).</p><p><b>CONCLUSION</b>MPFL reconstruction improves clinical symptoms. Anatomical MPFL reconstruction is effective for patellar dislocation, and it offers good recovery of the premorbid patella mechanics. The interference screw provides firm fixation. Allograft can avoid the graft harvest site morbidity, but it increases the cost of the surgery.</p>

Superficial peroneal neurocutaneous vascular axial adipofascial-cutaneous flap pedicled with lateral supramalleolar perforator for coverage of donor site defects at foot dorsum / 中华整形外科杂志

<p><b>OBJECTIVE</b>To report the operative techniques and clinical results of modified superficial peroneal neurocutaneous propeller adipofascial-cutaneous flap for reconstruction of donor site defects at foot dorsum.</p><p><b>METHODS</b>A propeller adipofascial flap with a skin pedicle (4-6 cm in width) based on the lateral superamalleolar perforating artery which vascularized the flap through the nutrient vessel chain of the superficial peroneal nerve was designed to repair defects after harvesting of foot pedicled dorsal flap. The defects at donor site of the leg was closed directly and split-thickness skin grafting was performed on the adipofascial surface of the flap primarily or secondarily.</p><p><b>RESULTS</b>From May 2007 to Oct. 2011, 7 cases were treated. All flaps were transplanted successfully with satisfactory cosmetic and functional results. The flaps size ranged from 19 cm x 8 cm to 30 cm x 11 cm.</p><p><b>CONCLUSIONS</b>The flap has reliable blood supply with a relatively large vascularized area, long rotation are and minimum donor-site cosmetic morbidity. It' s a simple and safe procedure which is suitable for covering donor sites defects after harvesting foot pedicled dorsal flap.</p>

Dominant perforator neurocutaneous flaps for one-staged reconstruction of defects caused by high energy at lower legs, ankles and feet / 中华整形外科杂志

<p><b>OBJECTIVE</b>To evaluate the therapeutic effect of dominant perforator neurocutaneous flaps for one-staged reconstruction of defects caused by high energy at lower legs, ankles and feet.</p><p><b>METHODS</b>From July 2003 to Feb. 2011, 39 cases, with defects caused by high energy at lower legs, ankles and feet, were retrospectively studied. The defects were covered primarily by one or two perforator neurocutaneous flaps (free or pedicled) which were based on a dominant perforator arising from the posterior tibial or peroneal artery (including the lateral supramalleolar perforating artery which is also from the peroneal vessel) respectively through sural, saphenous and superficial peroneal neurocutaneous vascular axis.</p><p><b>RESULTS</b>39 cases with 44 defects were treated by 32 sural neurocutaneous flaps based on the peroneal perforator (5 free and 27 pedicled), 6 saphenous neurocutaneous flaps on the posterior tibial perforator (1 free and 5 pedicled) and 6 superficial peroneal ones on the lateral supramalleolar perforating artery. The largest flap size was 22 cm x 10 cm. All flaps were survived successfully without necrosis. The average in-hospital time was 23 days ( ranged from 12-36 days).</p><p><b>CONCLUSIONS</b>The three kinds of dominant perforator neurocutaneous flaps have reliable blood supply with a relatively large size. They can be chosen and designed individually for all kinds of defects over the lower leg, ankle and foot. There are many advantages in a primary procedure, such as easier dissection, better vessel status in or around recipient areas, less secondary necrosis and lower risk of chronic infection. Moreover, the reduction of granulation and scar tissues benefit functional rehabilitation.</p>

Modified sural neurocutaneous vascular flap based on single dominant perforator arising from peroneal artery for coverage of defects over Achilles tendon / 中华整形外科杂志

<p><b>OBJECTIVE</b>To report the operative techniques and clinical results of specially designed sural neurocutaneous vascular flap pedicled on a dominant perforator (the diameter > or = 0.8 mm) of the peroneal artery for coverage of soft tissue defects overlying the Achilles tendon.</p><p><b>METHODS</b>An approximately rectangular sural neurocutaneous vascular flap pedicled on the lowest dominant perforator arising from the peroneal artery was designed and harvested to repair defects over the Achilles tendon. The pedicle was located at a certain part of the flap, which divided the flap into the distal and the proximal parts. After the tendon was repaired, the flap was rotated 180 degrees based on the perforator and the position of the distal and proximal parts of the flap was changed to cover the defects and part of the donor site respectively. In most cases, skin graft was not needed.</p><p><b>RESULTS</b>The modified flaps were applied in 15 cases. All flaps (ranged from 13 cm x 15 cm - 18 cm x 9 cm ) were transplanted successfully without necrosis, and no vascular problems occurred. Following up for 10-17 months showed both satisfactory functional and cosmetic results.</p><p><b>CONCLUSIONS</b>The modified flap has reliable blood supply and the special design provides nearly normal outline of the ankle which favorites shoe wearing. It' s an excellent option for covering defects overlying the Achilles tendon.</p>

Design of ABC damage variable and positioning system for acetabular fractures and 1122 cases multi-center statistic analysis / 中国骨伤

<p><b>OBJECTIVE</b>To design ABC damage variable and positioning system for acetabular fracture and explore the feasibility and clinical practical value of the system through the multi-center analysis of 1122 acetabular fractures.</p><p><b>METHODS</b>According to acetabular three-column conception, and pelvic ring lesions damage direction caused by acetabular fracture domino effect and injury degree of proximal femur joint, it defined class A as any column acetabular fracture; class B as any two-column acetabular fracture; class C as front, dome and posterior mixture acetabular fracture. Lower case English letters a, m, p represented front, dome, posterior fracture, respectively. Acetabular damage variables: 1 was simple displaced fractures; 2 was comminuted fractures; 3 was compression fractures. Pelvic ring lesions damage variables: alpha was sacroiliac joints or sacroiliac fracture horizontal separation deflection; beta was sacroiliac joints or sacroiliac fracture vertical separation deflection; gamma was pubic symphysis separation/superior and inferior ramus of pubis fracture deflection; alpha beta gamma delta was compound floating damage. Proximal humerus joint damage variables: I was femoral head fracture; II was femoral neck fracture; II was intertrochanteric fractures of femur; IV was I to III compound fracture. The ABC damage variable positioning system for acetabular fracture was made up by the above-mentioned variables. The statistics from March 1997 to February 2010 showed 1122 cases acetabular fractures with 18 cases of double side acetabular fracture and 1140 cases of acetabular fractures. The pelvics anterior-posterior view, ilium and obturator oblique view, and 2/3D-CT materials were analyzed and researched.</p><p><b>RESULTS</b>Each damage variables distribution situation in 1140 cases of acetabular fracture involved A in 237 cases (20.8%), B in 605 cases (53.1%), C in 298 cases (26.1%);front column fracture in 808 cases(70.9%), dome fracture in 507 cases (44.5%), posterior fracture in 1026 cases (90%). Acetabular variables: variabe 1 in 203 cases of simple displaced fracture (17.8%); variabe 2 in 516 cases of comminuted fracture(45.3%); variabe 3 in 421 cases of compression fracture (36.9%); 249 cases of pelvic ring lesions damage (21.8%), 75 cases femoral head fracture (6.6%); 18 cases of double side acetabular fracture and relative pelvic ring and proximal humerus joint variables (1.58%). Key part and curative effect elements of 1140 cases acetabular fracture: 507 cases of dome or posterior acetabular fracture (44.5%); 421 cases of compression fracture (36.9%); 249 cases of pelvic ring variables (21.8%); 75 cases of proximal humerus joint variables (6.6%); 486 cases of simple Aa/pl/2,Bapl/2 acetabular fracture (42.6% ).</p><p><b>CONCLUSION</b>Compression fracture, especially defected compression fracture, takes important part in acetabular damage variables, and also presents that acetabular fracture with pelvic ring and proximal femoral damage variables are not rare at all. The relationship of the acetabular fracture damage variables, and its percentage shows the key points and elements in clinical treatment: weight-bearing to dome accounts for 44.5%; compression to defects account for 36.9%, pelvic ring to float accounts for 21.8%; dome fracture to double side fracture account for 6.6%. The system has significant guiding effects on clinic in terms of evaluation of injury severity, anatomic localization, difficulty index, alternative strategy, operative approach, effect of treatment,and prognosis. And the most important thing is that the system creates the comparison of damage variables in same type of fracture and the communication of homo-language and explores a new method.</p>

Study of distribution of dominant perforators arising from peroneal artery with color Doppler flow imaging and its clinical significance for sural neurocutaneous flap / 中华整形外科杂志

<p><b>OBJECTIVE</b>To study the distribution of the dominant perforators (the diameter > or = 0.8 mm) of the peroneal artery with color Doppler flow imaging (CDFI) for the purpose of anatomical preparations for the perforator sural neurocutaneous flap.</p><p><b>METHODS</b>The dominant perforators of the peroneal artery (DPPA) were studied with CDFI on bilateral legs of 20 healthy volunteers. The numbers, diameters and locations of the perforators were recorded for a statistical analysis. From Jan. 2005 to Jan. 2009, 51 free or pedicled sural neurocutaneous flaps supplied by a single DPPA were designed and harvested to repair the defects near the ankle (n=22), at the leg (n=15) and the forefoot or hand dorsum (n=14). The perforators were located preoperatively with CDFI and accuracy of CDFI was evaluated intraoperatively. The causes of false results were analysed to improve examining techniques.</p><p><b>RESULTS</b>The average number of DPPA was 4.2 with the average diameter of (1.13 +/- 0.24) mm (0.80-1.90 mm). They were located in the second to ninth segment of the line from the fibular caput to the tip of lateral malleolus which was equally divided into nine segments. The largest DPPA was (1.43 +/- 0.29) mm (1.00-1.90 mm) in diameter and most of them were located in the third to fifth segment (80.4%). The average diameter of the lowest DPPA was (1.02 +/- 0.16) mm( 0.80-1.30 mm) and they were located between the sixth to ninth segment. The total 169 DPPA as well as the largest ones mostly appeared in the middle third of the leg. All of the 51 flaps were transplanted successfully without necrosis, and no vascular problems occurred. Preoperative CDFI examination had a 93.6% true-positive rate and an 88.0% positive predictive value. What should be demonstrated was that if just considered the cases after Dec. 2007, the true-positive rate was 97%, and the positive predictive value was 93.9%.</p><p><b>CONCLUSIONS</b>According to the distribution characteristics of DPPA, a sural neurocutaneous flap pedicled with one of this relatively large perforator can be designed and harvested to repair skin defects of leg and around ankle, but can not be utilized for that of forefoot. With anastomosis of the perforator, the flap based on the largest DPPA can be used as a free flap to cover defect anywhere. CDFI is reliable in preoperative location of DPPA, which makes the surgical procedures easier.</p>

Medial approach for popliteal artery injuries / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To evaluate the clinical application of the medial approach for repairing popliteal artery injuries.</p><p><b>METHODS</b>From 2002 to 2008, 11 cases of popliteal artery injuries had been repaired via the medial approach. Of these cases, 8 had limb fractures, 1 had knee dislocation, and 2 had visceral injuries. Ten popliteal arteries were anastomosed directly while one was repaired with a great saphenous vein graft.</p><p><b>RESULTS</b>The operation time ranged from 3 to 4 hours (averaging 3.6 hours). All the injured limbs survived. At the follow up, 8 legs recovered the full function, 2 had minor contracture, and 1 serious Volkmann's contracture without amputation.</p><p><b>CONCLUSION</b>The medial approach for repair of the popliteal artery is effective, applicable, and more advantageous to the management of multi-injures.</p>

Anatomic measurement of wrist scaphoid and its clinical significance / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To provide anatomical basis for the internal fixation of scaphoid fractures.</p><p><b>METHODS</b>The shape and vascular lake of 48 dry scaphoids and 36 wet scaphoids were observed.</p><p><b>RESULTS</b>The data of dry bone group and wet bone group were as follows: the height of scaphoid tubercle were (11.28+/-0.94) mm and (10.35+/-1.54) mm; the thickness of scapoid waist were (12.02+/-1.90) mm and (11.21+/-1.20) mm; the width of scapoid waist were (10.59+/-1.11) mm and (11.34+/-1.47) mm; the minimal thickness of the body of scapoid were (6.51+/-1.22) mm and (8.54+/-1.07) mm; the axis length of scapoid were (25.68+/-2.21) mm and (26.50+/-2.56) mm; the width of epicondyle of scaphoid of distal portion, waist and proximal portion were (6.50+/-1.06) mm, (5.14+/-1.01) mm, (4.42+/-1.16) mm and (6.64+/-1.18) mm, (6.01+/-0.75) mm and (5.71+/-0.78) mm, respestively. The main blood vessels came from the dorsal and the radial of wrist and passed through the whole scaphoid along the crest of scaphoid.</p><p><b>CONCLUSION</b>The internal fixation of scaphoid can be designed according to the anatomical data without damaging the articular surface and blood supply.</p>

Rapid prototyping drill guide template for lumbar pedicle screw placement / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies.</p><p><b>METHODS</b>A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engineering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its corresponding vertebra were manufactured using the rapid prototyping technique.</p><p><b>RESULTS</b>The accuracy of the drill template was confirmed by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to customize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill template fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the personalized template. During surgery, no additional computer assistance was needed.</p><p><b>CONCLUSIONS</b>The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising. Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.</p>

Application of navigation template to fixation of sacral fracture using three-dimensional reconstruction and reverse engineering technique / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To provide a new method in the fixation of sacral fracture by means of three-dimensional reconstruction and reverse engineering technique.</p><p><b>METHODS</b>Pelvis image data were obtained from three-dimensional CT scan in patients with sacral fracture. The data were transferred into a computer workstation. The three-dimensional models of pelvis were reconstructed using Amira 3.1 software and saved in STL format. Then the three-dimensional fracture models were imported into Imageware 9.0 software. Different situations of reduction (total reduction, half reduction and non-reduction) were simulated using Imageware 9.0 software. The best direction and location of extract iliosacral lag screws were defined using reverse engineering according to these three situations and navigation templates were designed according to the anatomic features of the postero-iliac part and the channel. The exact navigational template was made by rapid prototyping. Drill guides were sterilized and used intraoperatively to assist in surgical navigation and the placement of iliosacral lag screws.</p><p><b>RESULTS</b>Accurate screw placement was confirmed with postoperative X-ray and CT scanning. The navigation template was found to be highly accurate.</p><p><b>CONCLUSION</b>The navigation template may be a useful method in minimal-invasive fixation of sacroiliac joint fracture.</p>

Primary clinical result of digital template as navigation to supper cervical pedicle instrumentation / 中华外科杂志

<p><b>OBJECTIVE</b>To observe the primary clinical result of digital template as navigation to the upper cervical pedicle instrumentation.</p><p><b>METHODS</b>CT scan of upper cervical vertebrae was performed. 3-D model of upper cervical vertebrae was reconstructed by software Amira 3.1 and was preserved in STL format. Then 3-D model was run in software UG Imageware 12.0, the best pedicle channel was extracted according to the reverse engineering principle. A virtual navigational template was established according to he lamina anatomic trait, and the best pedicle channel. The virtual vertebrae and navigational template were manufactured using rapid prototyping. The navigational template was sterilized and used intra operative to assist with the placement of pedicle screw. The Accuracy of screw placement was confirmed with postoperative X-ray and CT scanning.</p><p><b>RESULTS</b>The digital navigational template had been established and used in the 3 cases, the good trajectory of cervical pedicle had been showed by the CT scan of post operation. There were not complications of related pedicle screw insertion.</p><p><b>CONCLUSIONS</b>A novel method of upper cervical pedicle location using Reverse Engineering and rapid prototyping has been developed; the navigational template is found to be highly accuracy and has great expectation.</p>

An anatomic study of vascularized fibular grafts / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To study the applied anatomy of the vascular and muscular innervations related to vascularized fibular grafts.</p><p><b>METHODS</b>Thirty-four cadaveric lower extremities were dissected for this study. The observations included fibular length, fibular nutrient artery, arcuate arteries, and innervation of fibular muscles. The fibulas were averagely divided into four segments and the locations of relevant vessels and nerves were ascertained.</p><p><b>RESULTS</b>All specimens had 1 fibular nutrient artery and 4-9 arcuate arteries except 1 specimen which had only 1 arcuate artery. The fibular nutrient artery and the first three arcuate arteries were constantly located between the distal half of the 1/4 segment and 2/4 segment of the fibula. The muscular branch of the superficial peroneal nerve passed through the surface of the periosteum in the 2/4 segment of the fibula.</p><p><b>CONCLUSIONS</b>The most proximal osteotomy point locates at the midpoint of the 1/4 segment by which it ensure the maximal potential for preserving the nutrient vessels. The muscular branch of the superficial peroneal nerve is fragile to injury at the 2/4 segment of the fibula.</p>

Clinical anatomic study of the lower lumbar anterolateral vein: with respect to retroperitoneal endoscopic surgery / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To study the anatomy of veins of the lower lumbar spine and provide the anatomic basement for laparoscopic lumbar surgery.</p><p><b>METHODS</b>A total of 15 formaldehyde-preserved cadavers were studied with special attention to the variety and surrounding structure of ascending lumbar vein (ALV) and iliolumbar veins (ILV), and their relationship with lumbar plexus.</p><p><b>RESULTS</b>ALV and ILV can be found on every sides, which have four variants including separate entry and common entry. The ascending vein and iliolumbar vein separately enter common iliac vein in 18 cases, and as a common stem enter the common iliac vein in 12 cases. Retracting common iliac vein medially both the ascending lumbar and the iliolumbar veins are always at risk of avulsion on exposure of the disc space. The injury of obturator nerve and lumbosacral trunk of lumbar plexus should be avoided.</p><p><b>CONCLUSION</b>Awareness of these anatomic variation can prevent the hemorrhage and be helpful for the surgeon in performing a careful ligation of these veins before medial retraction of the common iliac vein. Our findings emphasize the need for proper dissection of ALV and ILV before ligature during exposure of the lower lumbar spine.</p>

The clinic anatomy of lumbar plexus in the lumbar anterolaterally approach minimally invasive surgery / 中华外科杂志

<p><b>OBJECTIVE</b>To provide anatomic data for reducing lumbar plexus nerve injury.</p><p><b>METHODS</b>The applied anatomy of lumbar plexus was studied by 15 formaldehyde-preserved cadavers, two groups of sectional images of lumbar segment and three series of virtual chinese human dataset.</p><p><b>RESULTS</b>Arrangement of the lumbar nerve was regular. From anterior view, lumbar plexus nerve arranged from lateral to medial from L2 to L5; from lateral view, lumbar nerve arrange from ventral to dorsal from L2 to L5. The angle degree between the lumbar nerve and lumbar increased from L1 to L5. The lumbar plexus nerve was revealed to be in close contact with transverse process. By sectional anatomy, all parts of the lumbar plexus nerve were located in the dorsal third of the psoas major. The safety zone of the psoas major to prevent nerve injuries was ventrally 2/3.</p><p><b>CONCLUSIONS</b>Psoas major can be considered as surgery landmark when expose the lateral anterior of lumbar by incising the psoas muscle. Incising the psoas muscle ventral 2/3 can prevent lumbar plexus injury. Transverse process can be considered as landmark for the position of lumbar plexus in operation.</p>

Resection of centrally located primary liver cancer / 中国医学科学院学报

<p><b>OBJECTIVE</b>To summarize the experience of hepatectomy for patients with centrally located primary liver cancer.</p><p><b>METHODS</b>The clinical data of patients with centrally and non-centrally located primary liver cancer were retrospectively reviewed. The biochemical indicators, operation duration, hepatic inflow occlusion time, hospital stay, operative blood loss, amount of blood transfusion, complication, and effectiveness of three occlusion methods (semi-hepatic inflow occlusion, Pringle's manoeuvre, and modified Pringle's manoeuvre) were analyzed.</p><p><b>RESULTS</b>Tumor diameter, Child-Pugh score, indocyanine green retention rate, aspartate aminotransferase, alanine aminotransferase, glutamyltransferase, total bilirubin, direct bilirubin, albumin, prealbumin, cholinesterase, hepatic inflow occlusion time, blood transfusion, postoperative complications, and operative blood loss were not significantly different between patients with centrally and non-centrally located primary liver cancer. Patients with centrally located liver cancer had significantly longer operation duration and hospital stay than patients with non-centrally located liver cancer (P < 0.05). The modified Pringle's manoeuvre of hepatic inflow occlusion had the same effectiveness of the Pringle's manoeuvre and could be performed in a simpler way.</p><p><b>CONCLUSIONS</b>Hepatectomy is safe and feasible for patients with centrally located primary liver cancer. Appropriate preoperative evaluation and preparation, sufficient knowledge of liver anatomy, and proper selection of hepatic inflow occlusion method are key factors to guarantee the success of the resection.</p>

Biomechanical effect of vertebroplasty on the adjacent intervertebral levels using a three-dimensional finite element analysis / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To investigate the biomechanical effect of different volume, distribution and leakage to adjacent disc of bone cement on the adjacent vertebral body by three-dimensional osteoporosis finite element model of lumbar.</p><p><b>METHODS</b>L(4)-L(5) motion segment data of the cadaver of an old man who had no abnormal findings on roentgenograms were obtained from computed tomography (CT) scans. Three-dimensional model of L(4)-L(5) was established with Mimics software, and finite element model of L(4)-L(5) functional spinal unit (FSU) was established by Ansys 7.0 software. The effect of different loading conditions and distribution of bone cement after vertebroplasty on the adjacent vertebral body was investigated.</p><p><b>RESULTS</b>This study presented a validated finite element model of L(4)-L(5) FSU with a simulated vertebroplasty augmentation to predict stresses and strains of adjacent untreated vertebral bodies. The findings from this FSU study suggested the endplate and disc stress of the adjacent vertebral body was not influenced by filling volume of bone cement but unipedicle injection and leakage to the disc of bone cement could concentrate the stress of adjacent endplate.</p><p><b>CONCLUSIONS</b>Asymmetric distributions and leakage of cement into intervertebral disc can improve the stress of endplate in adjacent vertebral body. These results suggest that optimal biomechanical configuration should have symmetric placement and avoid leakage of cement in operation.</p>

Bi-pedicled V-Y gastrocnemius myocutaneous flap for repairing Achilles tendon and overlying skin defect: the anatomic basis and clinical application / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To study the anatomic basis of the bi-pedicled V-Y gastrocnemius myocutaneous flap for repairing the composite Achilles tendon defect.</p><p><b>METHODS</b>The pedicle anatomy of the bi-pedicled V-Y gastrocnemius myocutaneous flap was examined on 30 cadaver specimens. The sliding distances of the flap were measured at different knee flexion degrees. The bi-pedicled V-Y gastrocnemius myocutaneous flap was applied in 12 cases of Achilles tendon defect with simultaneous skin and soft tissue defect.</p><p><b>RESULTS</b>The sural arteries could be classified into four types. After cutting off the gastrocnemius origin with a "Z-shaped" incision, the sliding distance of the flap reached (3.7+/-0.5) cm when the knee flexed 0 degree, (4.9+/-0.7)cm when the knee flexed 30 degree,(6.7+/-0.7) cm when the knee flexed 60 degree and (9.2+/-0.9) cm when the knee flexed 90 degree. All the defects healed. The patients recovered ambulation with satisfactory knee and ankle function. The follow-up was 4 months-12 years.</p><p><b>CONCLUSIONS</b>Different sural artery types should be noticed during the harvest of the bi-pedicled-V-Y gastrocnemius myocutaneous flap. With 90 degree knee flexion, this flap is suitable for one-stage repair of composite Achilles tendon defect within 9.2 cm+/-0.9 cm.</p>